Fine tune mod - can't connect jumper cables to werkstatt

1 post / 0 new
neilsimpson
Fine tune mod - can't connect jumper cables to werkstatt

Hi

I've been posting about a problem I've been having with one of your mods on the moog music forum and thought I might try here too. The issue is as follows.

I'm very, very new to electronics and am trying out the fine tune mod (http://www.werkstattworkshop.com/?q=projects/fine-tune).

In the video, the presenter is able to plug his jumper cables into holes in the Werkstatt circuit board (TP2 and TP12, I think). However, on my Werkstatt, these holes are filled in with small amounts of solder. Am I missing something? Will I need to solder the jumper cables to the board? A couple of other people seem to have the same issue - http://forum.moogmusic.com/viewtopic.php?f=17&t=24094

Any advice on how best to proceed would be appreciated. Many thanks!